Identify compliance gaps before formal testing and reduce the risk of
costly re-testing, product changes and certification delays.
Sunren Technical Solutions provides pre-compliance testing and
accredited compliance testing services for telecom, IoT, cellular and
wireless products in India.
Our capabilities cover ITSAR cybersecurity testing, 5G FR1, LTE,
WCDMA, GSM, NB-IoT, oneM2M, Wi-Fi, Bluetooth and RF technologies
including HF, VHF and UHF.
Pre-compliance testing allows OEMs and product development teams to
evaluate a device before committing it to the formal regulatory
testing cycle. Where applicable, Sunren can also conduct full
compliance testing under its NABL-accredited scope.
What is Pre-Compliance Testing?
Pre-compliance testing is an evaluation performed before formal
regulatory compliance testing to identify whether a product is likely
to meet the applicable technical requirements.
Instead of discovering a problem after formal testing has started,
manufacturers can evaluate the product earlier, investigate failures
and make hardware, software, firmware, RF or configuration changes
before proceeding further.
This is particularly valuable for products where formal testing is
complex, time-consuming or expensive.
Pre-compliance testing can help you:
- Identify potential compliance failures at an early stage
- Reduce the risk of failure during formal testing
- Avoid unnecessary repeat testing
- Troubleshoot technical issues before certification
- Validate product and RF configurations
- Evaluate prototypes before production
- Reduce delays caused by late-stage design changes
-
Improve readiness for MTCTE, NCCS and other applicable regulatory
requirements
Pre-compliance testing does not replace mandatory compliance testing
or certification. It is a product-readiness exercise performed before
the formal process.
Pre-Compliance Testing Services at Sunren
1ITSAR Pre-Compliance Testing as per NCCS
Requirements
Sunren provides ITSAR pre-compliance testing for the cybersecurity
evaluation of telecom and network equipment against applicable
Indian Telecom Security Assurance Requirements (ITSAR) issued by the
National Centre for Communication Security (NCCS), Department of
Telecommunications.
ITSARs define security requirements that applicable telecom
equipment must satisfy as part of India's telecom security assurance
framework.
Formal cybersecurity testing can involve significant laboratory
effort, technical preparation and cost. Conducting an ITSAR
pre-compliance assessment gives OEMs an opportunity to identify
security gaps before entering the formal testing process.
ITSAR pre-compliance testing can help evaluate areas such as:
- Product security configuration
- Network and communication interfaces
- Authentication and access controls
- Software and firmware security
- Protocol-related security requirements
- Security-related product documentation
-
Applicable cybersecurity requirements defined by the relevant
ITSAR
Typical products include:
- IP Routers
- Wi-Fi Access Points / Wi-Fi CPE
- PON ONU / ONT
- PON OLT
- LAN Switches
- IoT Gateways
- IP Security Devices
- Other applicable telecom and network equipment
Sunren's pre-compliance approach allows product, engineering and
cybersecurity teams to identify potential non-conformities and
address them before incurring the time and cost associated with
formal ITSAR testing.
25G FR1 Base Station Pre-Compliance Testing
Sunren provides pre-compliance testing for 5G FR1 Base Stations and
BTS equipment, supporting manufacturers during product development
and regulatory preparation.
Testing is available for applicable 5G FR1 BTS configurations
including 1O, 1H and 1C.
A pre-compliance evaluation allows manufacturers to check the
performance of the equipment against relevant technical parameters
before proceeding to formal compliance testing.
Testing is suitable for products such as:
- 5G FR1 Base Stations
- 5G BTS equipment
- Small Cells
- Indoor 5G Base Stations
- Private 5G Network Equipment
- Radio Access Network equipment
- Enterprise 5G infrastructure
Testing early in the development cycle can help identify RF
performance, configuration and other technical issues while changes
to the equipment can still be implemented efficiently.
For manufacturers developing new 5G infrastructure equipment,
pre-compliance testing can therefore serve as an important
validation stage before formal regulatory evaluation.
3LTE, WCDMA & GSM eNodeB / BTS
Pre-Compliance Testing
Sunren provides pre-compliance testing for LTE, WCDMA and GSM
cellular network infrastructure, including applicable eNodeB and BTS
equipment.
Our testing capabilities support manufacturers developing or
validating cellular infrastructure across multiple generations of
mobile technology:
- LTE / 4G
- WCDMA / 3G
- GSM / 2G
Typical equipment includes:
- LTE eNodeB
- WCDMA Base Stations
- GSM BTS
- Cellular Radio Units
- Small Cells
- Indoor Cellular Systems
- Private Cellular Network Equipment
- Radio Access Network equipment
Pre-compliance testing enables engineering teams to evaluate
equipment performance before formal testing and investigate
technical issues relating to RF behaviour, configuration or other
applicable compliance parameters.
Manufacturers can use the results to make corrective changes and
re-evaluate the equipment before progressing to the final testing
stage.
4One M2M Pre-Compliance Testing for IoT
Devices as per MTCTE Requirements
Sunren provides oneM2M pre-compliance and conformance testing
support for applicable IoT and M2M devices.
oneM2M defines a standardized common service layer intended to
enable communication and interoperability between IoT devices,
applications, platforms and networks.
India has adopted relevant oneM2M specifications as national
standards through the Telecommunication Engineering Centre (TEC).
Where oneM2M requirements are applicable to a product under the
relevant MTCTE Essential Requirements, pre-compliance testing allows
manufacturers to evaluate their implementation before formal
testing.
Typical products include:
- IoT Sensors
- IoT Actuators
- IoT Gateways
- Smart Monitoring Devices
- Industrial IoT Devices
- Connected Controllers
- M2M Communication Equipment
Why perform oneM2M pre-compliance testing?
The evaluation can help identify issues relating to:
- oneM2M protocol implementation
- Communication between IoT entities
- Device configuration
- Functional behaviour
- Interoperability
- Applicable protocol conformance requirements
Testing before the formal MTCTE compliance process gives development
teams an opportunity to troubleshoot implementation issues before
certification timelines are affected.
55G FR1 UE – Pre-Compliance & Full
Compliance Testing
Sunren provides pre-compliance and full compliance testing for 5G
FR1 User Equipment (UE).
5G products can be evaluated during the development stage before
being submitted for formal regulatory testing. This gives
engineering teams an opportunity to identify potential RF or
technical non-conformities before the final test cycle.
Typical 5G FR1 UE products include:
- 5G Smartphones
- 5G Routers
- 5G CPE
- 5G IoT Gateways
- Industrial 5G Devices
- 5G Communication Modules
- Enterprise 5G Equipment
- Other 5G-enabled user equipment
Manufacturers can initially conduct 5G FR1 pre-compliance testing,
make corrections where required and subsequently proceed to full
compliance testing for applicable parameters.
This pre-to-full compliance approach is particularly useful for new
product designs, new RF configurations, antenna changes, chipset
changes and products approaching commercial launch.
NABL Accredited – subject to the applicable accredited scope and
test parameters.
6NB-IoT – Pre-Compliance & Full
Compliance Testing
Sunren provides NB-IoT pre-compliance and full compliance testing
for Narrowband Internet of Things devices and cellular IoT
equipment.
NB-IoT is widely used for low-power, wide-area IoT applications
where devices may need to operate reliably for extended periods
while communicating over cellular networks.
Pre-compliance testing allows manufacturers to evaluate the device
before formal testing and investigate potential issues relating to
RF performance, device configuration and applicable technical
requirements.
Typical NB-IoT products include:
- Smart Meters
- Asset Trackers
- Remote Monitoring Devices
- Industrial IoT Equipment
- IoT Sensors
- Smart Utility Devices
- Telemetry Equipment
- NB-IoT Modules
Products can first undergo NB-IoT pre-compliance testing to identify
potential issues and subsequently move to applicable full compliance
testing.
This allows OEMs to address technical problems before they affect
the formal certification timeline.
NABL Accredited – subject to the applicable accredited scope and
test parameters.
7LTE, WCDMA & GSM UE – Pre-Compliance
& Full Compliance Testing
Sunren provides pre-compliance and full compliance testing for
cellular User Equipment (UE) operating across:
- LTE / 4G
- WCDMA / 3G
- GSM / 2G
The service is suitable for manufacturers developing products that
communicate over one or more cellular technologies and need to
assess their compliance readiness before formal testing.
Typical products include:
- Smartphones
- Cellular Routers
- Cellular IoT Devices
- Asset Tracking Devices
- Cellular Modems
- Communication Terminals
- Cellular Modules
- Industrial Connected Equipment
Pre-compliance testing can help engineering teams identify problems
relating to RF performance, configuration and applicable technical
parameters before the product enters formal testing.
Once the product is ready, Sunren can support full compliance
testing for applicable parameters within its accredited testing
scope.
This enables manufacturers to use the same laboratory ecosystem for
both early product validation and formal compliance evaluation.
NABL Accredited – subject to the applicable accredited scope and
test parameters.
8Wi-Fi, Bluetooth, HF, VHF & UHF –
Pre-Compliance & Full Compliance Testing
Sunren provides RF pre-compliance and full compliance testing for
wireless and radio communication products, covering:
- Wi-Fi
- Bluetooth
- HF – High Frequency
- VHF – Very High Frequency
- UHF – Ultra High Frequency
Pre-compliance RF testing allows manufacturers to evaluate wireless
performance before proceeding with formal regulatory testing.
Depending on the applicable technology and test requirement,
evaluation may include parameters relating to RF output, occupied
bandwidth, frequency characteristics, unwanted emissions and other
relevant radio performance requirements.
Typical products include:
- Wi-Fi Routers
- Wireless Access Points
- Bluetooth-enabled Devices
- IoT Gateways
- Wireless Modules
- Smart Devices
- Industrial Wireless Equipment
- Radio Communication Equipment
- Asset Tracking Devices
- Connected Electronic Products
Products can undergo pre-compliance testing during development or
before regulatory submission. Applicable products can subsequently
proceed to full compliance testing under Sunren's accredited testing
scope.
NABL Accredited – subject to the applicable accredited scope and
test parameters.
9Customised Testing Solutions
If your testing requirement is not covered under the services listed
above, or if you require a customised combination of testing
services, our team can work with you to define an appropriate
testing approach.
Share your product details and testing requirements with us, and
Sunren Technical Solutions will develop a customised solution based
on your specific needs.
Contact our technical team to discuss your requirement.
Contact Our Technical Team
